LATEST PRODUCT NEWS AND NEW ARRIVALS

Check out our Facebook page!
It's the easiest way to keep up with the latest Sato Racing news, and see exclusive photos of new Sato Racing parts!

8/14/'17

New Racing Hooks now in stock!


Honda CBR1000RR '17 Racing Hooks

These high strength billet aluminum Racing Hooks for 2017 Honda CBR1000RR provide sturdy loops useful for hooking on tie-down straps or bungee cords. Choose from Black or Gold anodized finish. (L/R Set of 2)

Product Details:
CBR1000RR '17 Racing Hooks



[L] Racing Hook for Honda CBR250RR '17-

This L-side only Racing Hook for the new (non-US) Honda CBR250RR provides a sturdy anchor point for attaching straps or bungee cords. Choice of Black or Gold anodized finish.

Product Details:
Honda CBR250RR '17- Racing Hook



[L] Racing Hook for Suzuki SV650 '16-

This L-side Racing Hook for 2016-17 SV650 is a stylish way to fill the exposed frame holes when the left passenger peg bracket has been removed. Choice of Black or Gold anodized finish.

Product Details:
Suzuki SV650 '16- Racing Hook


7/27/'17

Rear Sets for KTM Super Duke GT!

Arriving in August - Rear Sets for 2016-17 KTM 1290 Super Duke GT! These sleek new Rear Sets provide 4 adjustable foot peg positions in a range that brings your feet higher up and slightly forward compared to stock. Made of billet aluminum anodized in your choice of a deep Black or vivid Gold finish.

Product Details:
1290 Super Duke GT Rear Sets


6/14/'17

Honda Interceptor / VFR800F '14- Frame Sliders!

Now in stock - Honda Interceptor '14- Frame Sliders! These heavy-duty sliders utilize slider pucks made of DELRIN for maximum protection of the exposed parts if you lay it down at speed. With anodized billet aluminum collars and a chrome moly throughbolt. (fairing mods required for installation)

Product Details:
Interceptor/VFR800F '14- Frame Sliders


6/6/'17

Race Concept Rear Sets for Kawasaki Z125 Pro!

New at SATO RACING - Kawasaki Z125 Pro 'Race Concept' Rear Sets! These multi-position racing Rear Sets are available in 2 versions: Stock Shift Rear Sets, or Reverse Shift Rear Sets (pictured above), which provide a dedicated GP-style reverse shift pattern. Both versions give you an aggressive range of adjustable foot peg positions that can bring your feet as much as 137.5mm further rearward compared to the stock foot rests, so it is easier to reposition your body for a less upright, more tucked-in riding position. Gold anodized finish.

(NOTE: Our 'Race Concept' series of Rear Sets are designed for track use only and are not intended for street use. Not compatible with the stock brake light switch)

Product Details:
Race Concept Rear Sets- Z125 Pro


5/24/'17

Helmet Locks for Kawasaki Z125 Pro,
Suzuki SV650 '16- and GSX-S1000/F!

Kawasaki Z125 Pro Helmet Lock - This handy lock fits in a discreet location under the tail section, providing a secure and convenient way to lock up your helmet on your Z125 Pro.

Product Details:
Helmet Lock - Z125 Pro


Suzuki SV650 '16- Helmet Lock - This all-new helmet lock installs behind the left side tandem bracket on 2016 and up Suzuki SV650 series. Includes 2 keys.

Product Details:
Helmet Lock - SV650 '16-


Suzuki GSX-S1000/F Helmet Lock - This rugged lock mounts under the tail section on the left side, providing a convenient place for hanging a helmet on a '17 and up GSX-S1000 or GSX-S1000F.

Product Details:
Helmet Lock - GSX-S1000/F

More Sato Racing Helmet Locks



4/4/'17

Frame Sliders for Kawasaki Z125 Pro!

SATO RACING Frame Sliders for the new Kawasaki Z125 Pro feature beefy DELRIN slider pucks mounted on anodized billet aluminum brackets and collars, for excellent protection from damage if you drop it at speed on the track.

Product Details:
Frame Sliders - Z125 Pro


3/23/'17

Yamaha FZ-07 Rear Sets now available in Silver!

SATO RACING Rear Sets for 2014 and up Yamaha FZ-07 / MT-07 were originally available in either Black or Gold anodized finish, but now we have added Silver (clear metal) anodized finish to the color choices. This finish looks especially nice on FZ-07 models where the stock center frame portion is also silver.

Product Details:
FZ-07 / MT-07 Rear Sets


3/22/'17

Rear Sets for ABS-equipped H-D Sportster models!

SATO RACING Rear Sets for 2014 and up Harley Sportster XL 883 and XL1200-series models with ABS are now in stock! These anodized billet aluminum Rear Sets have peg positions that bring your feet higher up and significantly rearward compared to the stock foot pegs. Tandem Brackets are an available option for the XL1200, letting you attach the stock passenger pegs.   ( NOTE: Not for use with the stock exhaust. )

Product Details:
XL883 / XL1200 ABS Rear Sets


1/11/'17

NEW Flush Mount-style Frame Sliders for Yamaha R1!

SATO RACING Frame Sliders - Flush Mount-style for 2015 and up Yamaha YZF-R1 provide a sleek, low-profile alternative to traditional Frame Sliders. Featuring tough Delrin slider plates and anodized billet aluminum mounting brackets, they go great with our standard Engine Sliders (as seen in the photo above), adding an additional range of protection, or you can install them separately. Now in stock!

Details:
YZF-R1 Flush Mount-style Frame Sliders

More Sato Racing parts for R1



1/5/'17

Chain Hook for Yamaha R1!

This handy anodized billet aluminum Chain Hook for 2015+ Yamaha YZF-R1 holds the chain up and out of the way when the bike is on a stand and the rear wheel has been removed. It also prevents the chain from dragging on the ground, so it doesn't pick up any dirt during wheel changes. Now in stock!

Details:
Yamaha R1 Chain Hook

More Sato Racing parts for R1



Frame Sliders for Yamaha MT-03!

New at Sato Racing - Frame Sliders for (non-US) Yamaha models MT-03 and MT-25 ('15- )! These high strength sliders utilize tough, abrasion-resistant DELRIN slider pucks with anodized billet aluminum brackets and collars.

Details:
Yamaha MT-03 / MT-25 Frame Sliders

More Sato Racing parts for MT-03 / MT-25


12/29/'16

Race Stand Hooks for FZ-09 and XSR900!

These high strength billet aluminum Race Stand Hooks for 2014 and up Yamaha FZ-09 / MT-09 and XSR900 are ideal for use with a spool-type bike stand. Choose from Black or Gold anodized finish. Now in stock!

Details:
FZ-09 / XSR900 Race Stand Hooks

More Sato Racing parts for FZ-09 and XSR900


12/27/'16

Race Stand Hooks for 2016 ZX-10R!

This sturdy set of gold-anodized billet aluminum Race Stand Hooks for 2016 and up Kawasaki ZX-10R are great for mounting the bike onto a spool-type stand. Now in stock!

Details:
'16 ZX-10R Race Stand Hooks

More Sato Racing parts for 2016 ZX-10R


12/19/'16

New for 2016-17 Suzuki SV650/ ABS!

Rear Sets
Stylish billet aluminum Rear Sets with 5 adjustable positions in a range that brings your feet higher and further back compared to stock. ABS compatible. Choice of Black, Silver or Gold anodized finish. Now in stock!


Frame Sliders
Beefy slider pucks made of high strength Delrin, for excellent protection of the engine and other exposed parts if you drop the bike while in motion. Now in stock!


Helmet Lock
This high quality Helmet Lock installs in a convenient location on the left side below the seat. Available Spring 2017!

More Sato Racing parts for '16 SV650



12/12/'16

New parts for 2016-17 Honda GROM!

Rear Sets (standard version)
Anodized billet aluminum Rear Sets with adjustable peg positions. Brake light switch compatible. Choice of Black or Gold.


'Race Concept' Rear Sets
Gold-anodized billet aluminum racing Rear Sets with an aggressive range of positions, for dedicated track bikes.


Frame Sliders
Delrin slider pucks mounted with sturdy anodized billet aluminum brackets, for protection of the exposed engine parts if you lay it down at speed.


'Race Concept' Handle Stoppers
Set of Delrin stoppers on gold-anodized mounts - Directly blocks the movement of the fork, protecting the stock stopper tabs from damage if the bike falls. Fits all years of GROM. (for track use only).


'Race Concept' Master Cylinder Protector
Gold-anodized billet aluminum guard protects the Grom's brake master cylinder parts from damage in a crash. (for track use only).


Helmet Lock
Our 'universal' handle bar mount-type Helmet Lock works great on the Grom, the ideal solution for securing your helmet when you leave it on the bike. In stock now!

More Sato Racing parts for Honda GROM



11/17/'16

Low-Profile Frame Sliders for 2016 ZX-10R!

These new Low-Profile Style Frame Sliders for 2016 Kawasaki ZX-10R feature compact revolver-style sliders, and are a sleek alternative to our standard full-size Frame Sliders for ZX-10R. They sit closer to the fairings while still providing excellent protection if you drop the bike at speed. Now in stock!

Details:
'16 ZX-10R Frame Sliders

More Sato Racing parts for 2016 ZX-10R


10/27/'16

Reverse Shift Rear Sets for Suzuki GSX-S1000/F!

New at SATO RACING - Reverse Shift Rear Sets for 2015-16 Suzuki GSX-S1000/F ! Featuring a GP-style shift pedal linkage for a dedicated reverse shift pattern. With 5 adjustable peg positions higher and further back compared to stock. Fully compatible with the stock brake light switch and ABS. Choice of Black, Silver or Gold. (A Stock Shift version of these Rear Sets is also available)

More info: Suzuki GSX-S1000/F Rear Sets


More Sato Racing parts for GSX-S1000/F


10/21/'16

New Handle Bar End styles for BMW!

We added additional styles and colors to our lineup of Handle Bar Ends for BMW S1000RR/ S1000R (and other BMW models with M12-size bar end bolts). Gunmetal (irridescent dark gray) is now among the color choices offered for both the SHORT and LONG-style Handle Bar Ends. In addition, we have added Stainless Steel to the choices for the SHORT style bar ends, so now there are a total of 10 bar end styles to choose from!

More info: BMW S1000RR Handle Bar Ends


10/13/'16

Race Concept-series Rear Axle Sliders!

Coming soon to SATO RACING - Race Concept Rear Axle Sliders! These lightweight Axle Sliders were developed for SST class endurance racing, along with the Suzuka 8 Hours endurance race. Made of tough Delrin for excellent protection from scrapes or other damage if you slide at speed on the track. Compact right-side slider is cone-shaped to allow for easy removal of the axle shaft. Available soon for 2015+ Yamaha YZF-R1, 2016 Kawasaki ZX-10R, 2016 Aprilia RSV4 RR, and 2016 Ducati 959 Panigale, with more models on the way!

Details:
Aprilia RSV4 '16
Ducati 959 Panigale '16
Kawasaki ZX-10R '16
Yamaha YZF-R1 '15-


9/15/'16


Race Concept Rear Sets for 2016 ZX-10R!

Our new 'Race Concept' edition Rear Sets for 2016 Kawasaki ZX-10R are pure, no-compromise, racing-spec Rear Sets*. Featuring a modular base plate / step plate design that provides 9 adjustable positions in a useful range for the track, and a heavy duty multi-link shift linkage that provides a dedicated reverse (GP style) shift pattern. Choice of Black or Gold. In stock now!

*
(Our 'Race Concept' Rear Sets are for track use only, and are not designed for use with the stock brake light switch or ABS.)


Front Axle Sliders for 2016 ZX-10R!

These new Front Axle Sliders for '16 ZX-10R feature slider pucks made of dense, abrasion-resistant Delrin plastic for excellent protection of the front wheel and fork area if you lay the bike down. Sliders are securely fastened to the front wheel hub with a stainless steel throughbolt. In stock now!

More Sato Racing parts for 2016 ZX-10R


9/12/'16

Frame Sliders for 2016 ZX-10R!

These tough new Frame Sliders for the 2016 Kawasaki ZX-10R feature twist-on 'revolver'-style slider pucks made of dense, abrasion-resistant Delrin plastic, attached with anodized billet aluminum collars and chrome molybdenum bolts. (Set of 2) Coming soon!

More Sato Racing parts for 2016 ZX-10R


9/9/'16

[L] Racing Hook for 2016 ZX-10R!

This stylish anodized billet aluminum [L]-side Racing Hook for 2016 Kawasaki ZX-10R provides a sturdy loop for a tie-down strap when the left passenger peg bracket has been removed, very useful for those times when you need to strap down the bike to transport it. Also fits the 2011-15 model! (Black or Gold)

More Sato Racing parts for 2016 ZX-10R


8/31/'16

Race Stand Hooks for Yamaha R3!

Coming soon to SATO RACING - Yamaha YZF-R3 Race Stand Hooks ! These high strength billet aluminum Stand Hooks allow quick mounting of the rear wheel onto a spool-type bike stand. Gold anodized finish, with Black anodized swingarm brackets and stainless steel bolts. (L/R Set of 2)

More Sato Racing parts for R3


8/1/'16

Frame Plugs for Kawasaki H2!

New at SATO RACING - Frame Plugs for Kawasaki H2 ! These stylish anodized billet aluminum Frame Plugs are a perfect way to hide the exposed frame holes on a Ninja H2. Choice of Black, Silver or Gold. 4-Piece Set (2 Frame Plugs per side). In stock now!

More Sato Racing parts for H2


7/20/'16

Helmet Lock for BMW K1600 GT!

Just arrived at SATO RACING - Helmet Lock for BMW K1600 series (2011- ) ! This tough lock installs in a convenient spot below the seat behind the exhaust hanger bracket on either the left or right side of the bike, giving you a secure way to stow your helmet on the bike when you are parked somewhere. Includes 2 keys.

7/18/'16

Shift Arm for Suzuki!

This anodized billet aluminum Shift Arm fits most Suzuki models. Includes 2 attachment holes for attaching the shift rod, for a wider range of adjustment compared to the stock shift arm. Works great with SATO Rear Sets. Kit includes a rod end (heim joint). Now in stock!

More Sato Racing parts for Suzuki


7/15/'16

2016 Kawasaki ZX-10R parts!


'16 ZX-10R Rear Sets
Black, Silver or Gold anodized billet aluminum Rear Sets with a wide range of adjustable positions. Choice of standard (stock shift pattern) or Reverse Shift Rear Sets.

'16 ZX-10R Helmet Lock
Our Helmet Lock originally designed for the 2011-15 generation ZX-10R also works great on the new 2016 model. Fts in a convenient location behind the pasenger peg bracket. Now in stock!

More Sato Racing parts for 2016 ZX-10R


Kawasaki Ninja 250 SL '15- parts!

New parts now in stock or coming soon for the 'super lightweight' offshoot of the Ninja 250/ 300 (currently sold in Europe and Asia).

Ninja 250SL Rear Sets
High quality anodized billet aluminum Rear Sets with adjustable peg mounting positions. Choice of Black, Silver or Gold. A Reverse Shift Kit will also be available for this model. (ETA Fall 2016)


Ninja 250SL Frame Sliders
Featuring DELRIN slider pucks mounted on sturdy anodized billet aluminum brackets, for excellent protection of the farings. (ETA Fall 2016)


Ninja 250SL Preload Adjusters
Our Fork Spring Preload Adjusters for Ninja 250SL let you adjust the fork spring preload to your preference. Made of anodized billet aluminum with your choice of Black, Silver or Gold, with Gold adjustment bolts. Now available!


More Sato Racing parts for Kawasaki



5/13/'16

Helmet Lock for Yamaha FZ-07 / MT-07!

Just arrived at SATO RACING - Helmet Lock for Yamaha FZ-07 / MT-07 ! This rugged lock installs behind the passenger peg bracket on the left side of the bike, giving you an easy way to stow your helmet on the bike. Includes 2 keys.

More Sato Racing parts for Yamaha FZ-07


5/3/'16

New parts for Yamaha XSR900, FZ-07!

We have confirmed that all of the parts we make for Yamaha FZ-09 / MT-09 are also fully compatible with the new XSR900, including Rear Sets, Frame Sliders, Engine Siders, Axle Sliders, Racing Hooks, Oil Filler Cap and more!

Racing Hooks for Yamaha FZ-07 / MT-07 - Arriving this month to Sato Racing! These billet aluminum hooks provide sturdy anchor points for strapping down your Yamaha FZ-07 or MT-07 when the passenger peg brackets have been removed. Choice of Black or Gold anodized finish. (L/R Set of 2)

Most of our other new parts for FZ-07 / MT-07 are now in stock, including Rear Sets, Frame Sliders and Axle Sliders.

More Sato Racing parts for Yamaha


4/20/'16

Shift Spindle Holder for Honda GROM now in stock!

SATO RACING Shift Spindle Holder for Honda GROM ('14- ) adds strength and rigidity to the shift rod linkage by reducing play in the shift spindle, for more consistent and precise shifting and extra durability in heavy-duty use. Gold anodized billet aluminum with a Teflon inner bushing. Limited quantities now in stock.

More Sato Racing parts for Honda Grom


4/14/'16

Suzuki Hayabusa [L]-Side Engine Slider!

SATO RACING [L] Engine Slider for Suzuki GSX1300R Hayabusa (all model years) features a tough, abrasion-resistant DELRIN slider mounted with a high strength anodized billet aluminum bracket, for protection of the left side engine case and fairing if you lay it down at speed. Now in stock!

More Sato Racing parts for Hayabusa


4/7/'16

Front Axle Sliders for Yamaha YZF-R1 '15- !

SATO RACING Front Axle Sliders for 2015-16 YZF-R1 feature slider pucks made of hard, abrasion-resistant DELRIN for maximum protection of the wheel and fork area if you slide on the track. Secured to the wheel hub with a stainless steel through-bolt. Now in stock!

More Sato Racing parts for YZF-R1


2/26/'16

Coming soon - Rear Sets for Triumph Street Triple '13- !


Arriving Spring 2016 - Triumph Street Triple '13- Rear Sets! CNC-machined from high grade billet aluminum, these stylish Rear Sets give you a choice of 5 adjustable peg positions that bring your feet higher compared to stock. Can be set up for either stock or reverse (GP) shift pattern. Choice of Black, Silver or Gold anodized finish.

More Sato Racing parts for Street Triple


2/22/'16

GSX-S1000 and CBR650F Rear Sets now in stock!


Suzuki GSX-S1000/F Rear Sets
Our Rear Sets for '15- GSX-S1000 and GSX-S1000F provide 5 adjustable peg positions that bring your feet up and back compared to stock. ABS compatible. Choice of Black, Silver or Gold finish. (Standard version Rear Sets in stock. Reverse Shift Rear Sets coming soon)

More Sato Racing parts for Suzuki GSX-S1000



Honda CBR650F '14- Rear Sets
These high quality billet aluminum Rear Sets feature a modular design with 6 adjustable positions. Can be used with either stock or reverse shift pattern. Choice of all-Black, or Silver or Gold w/ contrasting Black base plates and pedals. Now in stock in Black.

More SATO RACING parts for Honda CBR650F


2/19/'16

Sliders for '13- Triumph Street Triple arriving soon!

'13- Street Triple Frame Sliders
Tough, abrasion resistant Delrin slider picks mounted with anodized billet aluminum brackets, for effective protection of the fairings and other exposed parts if you lay it down at speed.


'13- Street Triple Engine Sliders
Featuring DELRIN slider pucks mounted on sturdy anodized billet aluminum brackets, for excellent protection of the engine case. Left and right side sliders, sold separately.

More Sato Racing parts for Street Triple



2/10/'16

More new parts for '14- Honda GROM!

Honda GROM Shift Spindle Holder
Our Shift Spindle Holder for GROM adds strength and rigidity to the shift linkage by reducing play in the shift spindle, for more consistent and precise shifting. Gold anodized billet aluminum with a Teflon inner bushing.


Honda GROM '14-'15 Frame Sliders
Featuring DELRIN slider pucks mounted on sturdy anodized billet aluminum brackets. For excellent protection of the exposed engine parts.


2/09/'16

New for '15- Moto Guzzi V7 II !


Moto Guzzi V7 II Rear Sets
These stylish billet almuinum Rear Sets for V7 II bring your feet higher up and significantly further back compared to stock, for a less upright riding position ideally suited for the track. Choice of Black or Silver anodized finish. (ETA Spring 2016)


Moto Guzzi V7 II Frame Sliders
Tough DELRIN slider pucks with billet aluminum mounts, ideal for protecting the exposed engine and exhaust parts if you lay it down while in motion. (ETA Spring 2016)


1/28/'16

Clutch Slave Cylinder for Kawasaki H2 !


Kawasaki H2 Clutch Slave Cylinder
This anodized billet aluminum Clutch Slave Cylinder for H2 has a larger bore compared to stock, for a less heavy clutch feel and more precise clutch engagement/disengagement. Choice of Silver or Gold.

More Sato Racing parts for H2


1/20/'16

Rear Sets for Ducati 1299 Panigale now in stock!


New at SATO RACING - Ducati 1299 Panigale Rear Sets! Machined from high grade billet aluminum, these fine quality adjustable Rear Sets can be set up for either stock or reverse (GP) shift pattern. Choice of Black, Silver or Gold anodized finish. Black and Gold now in stock.


More Sato Racing parts for 1299 Panigale



1/9/'16

New parts for Yamaha FZ-07 / MT-07 ('14- ) coming soon!

FZ-07 / MT-07 Rear Sets
These anodized billet aluminum Rear Sets provide a range of adjustable positions that bring your feet substantially higher and further back compared to stock for a sportier riding position. Choice of Black or Gold.


FZ-07 / MT-07 Frame Sliders
Tough DELRIN slider pucks protect the middle section of the bike from damage if you ever lay it down on the track.
Now in stock!


FZ-07 / MT-07 [R] Engine Slider
Delrin slider puck with anodized billet aluminum base designed to protect the engine case and other exposed parts on the lower right side. Now in stock!


FZ-07 / MT-07 Timing Hole Plug
Delrin guard with gold anodized billet aluminum base to help protect the engine case area on the left side from scrapes and other damage.


FZ-07 / MT-07 Front and Rear Axle Sliders
Delrin slider pucks fastened to the hub with a stainless steel throughbolt, for thorough protection of the wheel area if you slide. Front and Rear Axle Sliders sold separately.


FZ-07 / MT-07 Helmet Lock
This handy lock mounts in a convenient location on the left side of the bike, so you can hang your helmet on your bike when you are parked somewhere without worrying too much about it getting taken.

More Sato Racing parts for Yamaha FZ-07 / MT-07



1/8/'16

Shift Spindle Holder for Kawasaki H2 !


Kawasaki H2 Shift Spindle Holder
This stylish anodized billet aluminum Shift Spindle Holder adds strength and rigidity to the shift rod linkage for smoother, more precise shift action. ETA Spring 2016.

More Sato Racing parts for H2


12/11/'15

Helmet Lock for '15 BMW R1200R now in stock!


New at SATO RACING - BMW R1200R Helmet Lock! This rugged lock installs in a convenient location below the seat on the left side, the ideal solution for those occasions when you want to stop someplace while out on a ride and don't necessarily want to carry your helmet around with you. Includes 2 keys.


More Sato Racing parts for BMW R1200R



11/27/'15

Rear Sets for '14-'15 Honda Interceptor / VFR800F coming soon!


Coming soon to SATO RACING - Rear Sets for '14- Honda Interceptor / VFR800F! Made of anodized billet aluminum (Black, Silver or Gold), these high quality adjustable Rear Sets let you choose from 6 positions, so you can find the ideal position for your riding style.

2 versions of these Rear Sets are available: for quick-shifter equipped models and for standard (non-quickshifter) models.


More Sato Racing parts for Honda Interceptor



11/2/'15

New parts for '15- BMW R1200R/RS coming soon!

BMW R1200R/RS Rear Sets
These anodized billet aluminum Rear Sets for BMW R1200R/RS feature 6 adjustable positions that place your feet higher up and further back compared to stock.


BMW R1200R/RS Front Axle Sliders
Abrasion-resistant Delrin slider pucks fastened to the hub with a stainless steel throughbolt, for excellent protection of the front wheel and fork area.


Tie Down Spools
These anodized billet aluminum Tie-Down Spools turn existing 8mm bolt locations on your bike into convenient anchor points for bungee cords and cargo nets. Choice of Black, Silver or Gold. (Set of 2). Now in stock!

More Sato Racing parts for BMW R1200R/RS



11/2/'15

New parts for '15 Ducati Scrambler coming soon!

Ducati Scrambler Rear Sets
These anodized billet aluminum Rear Sets for '15 Scrambler feature a sleek, flat track racer-inspired design that brings your feet further rearward compared to stock for a sportier riding position.


Ducati Scrambler Frame Sliders
Tough, abrasion-resistant DELRIN slider pucks provide excellent protection if you lay it down at speed on the track. Black anodized billet aluminum collars and a chrome molybdenum throughbolt hold the sliders securely in place.


Ducati Scrambler [L] Engine Slider
Delrin slider puck with anodized billet aluminum base designed to protect the engine case and other exposed parts on the lower left side. Originally designed for Monster 1200, this slider also fits great on Scrambler.


Ducati Scrambler Front Axle Sliders
Delrin slider pucks fastened to the hub with a stainless steel throughbolt, for great protection of the front wheel and fork area if you slide it.


Ducati Scrambler Rear Axle Spools
Set of spools made of Delrin, fastened to the rear wheel hub with stainless steel bolts. For use with a hook type race stand.

More Sato Racing parts for Ducati Scrambler



10/31/'15

Rear Sets for '15- Suzuki GSX-S1000/F !


Suzuki GSX-S1000/F Rear Sets
These high quality billet aluminum Rear Sets for '16 GSX-S1000/F provide 5 adjustable foot peg positions. Choice of Black, Silver and Gold anodized finish. ETA Feb. 2016.

More Sato Racing parts for Suzuki GSX-S1000


10/22/'15

New parts for Suzuki Hayabusa!



Suzuki Hayabusa '14- Rear Sets
New ABS-compatible Rear Sets for '14-'15 GSX1300R Hayabusa feature 5 adjustable positions. Made of billet aluminum - Choice of deep Black or vivid Gold anodized finish. (ETA late-Dec. 2015)


Suzuki Hayabusa '14- Frame Sliders
Twist-on 'revolver'-style sliders made of abrasion-resistant DELRIN will help protect the fairings if you drop it at speed. L/R set of 2.


Suzuki Hayabusa Front Axle Sliders
These DELRIN axle sliders are a great way to protect front wheel and fork area from scrape damage in a fall. In stock now!

More Sato Racing parts for Suzuki models


10/6/'15

Kawasaki H2 Rear Sets!


Coming soon to SATO RACING - Rear Sets for '15 Kawasaki H2! These stylish billet aluminum Rear Sets give you a choice of 5 peg positions, placing your feet higher up and further back compared to stock, providing a more ideal riding position for aggressive riding.

2 versions of these Rear Sets will be available: The standard version, which has a stock shift pattern, and Reverse Shift Rear Sets, which features a dedicated GP-style reverse shifting pattern. Choice of Black or Gold anodized finish.

Details


9/30/'15

More new parts for '15- Yamaha YZF-R1 arriving soon!


Yamaha YZF-R1 '15- Helmet Lock
This rugged lock installs behind the passenger peg bracket on the left side of the bike, giving you a secure and easy way to stow your helmet on the bike.


Yamaha YZF-R1 '15- Race Stand Hooks
These billet aluminum Race Stand Hooks allow quick mounting onto a spool-type bike stand. Choice of Black or Gold anodized finish. (Set of 2).


Yamaha YZF-R1 '15- Racing Hooks
These anodized billet aluminum Racing Hooks provide sturdy anchor points for strapping down your 2015-16 YZF-R1 when the passenger peg brackets have been removed. Black or Gold.
(Set of 2).

More new parts for '15- R1


9/24/'15

NEW Folding-style Pedal Tips!


In stock now - Folding Pedal Tips for SATO RACING Rear Sets! These premium toe tips feature a spring-loaded center pivot that allows it to bend without breaking if subjected to force, such as if you drop your bike. Made of anodized aluminum (black and gold) with a replaceable fluted rubber grip. Two versions are available - Left-side (for shift pedal) and Right-side (brake pedal).

Details


9/17/'15

'Race Concept' Rear Sets for Suzuki GSX-R series now in stock!


SATO RACING 'Race Concept' series of Rear Sets are pure, no-compromise race-spec Rear Sets, designed for track-only bikes. (Not recommended for street use).

Our new 'Race Concept' Rear Sets for '09- Suzuki GSX-R1000 and '11- GSX-R750/600 feature a wide range of adjustable positions that let you move your feet up to 85mm higher compared to stock, ideal for maximizing lean angle during aggressive cornering. Choice of Black anodized finish with gold accents, or Gold over Black.

Details


8/27/'15

New parts for Suzuki GSX-S1000/F coming this Fall!



Suzuki GSX-S1000/F ('15-) Frame Sliders
Tough DELRIN slider pucks mounted to the frame with anodized billet aluminum collars and chrome molybdenum bolts, for protection of the engine case and fairings if you slide. (Set of 2)


Suzuki GSX-S1000/F ('15-) Front Axle Sliders
These DELRIN axle sliders help protect the front wheels and fork area from damage in a fall.


Timing Hole Plugs for Suzuki
DELRIN guards mounted on gold-anodized billet aluminum bases, for protection of the engine case and lower fairing if you slide on the track. 'Clutch Side' and 'Point Side' versions, for GSX-S1000 and other Suzuki sportbike models that have exposed timing hole covers. In stock now!


Suzuki GSX-S1000/F ('15-) Racing Hooks
These anodized billet aluminum Racing Hooks provide sturdy anchor points for tie-down straps when the passenger pegs have been removed. Choice of Black or Gold.

More parts for Suzuki


8/11/'15

Helmet Lock for BMW S1000R!

This rugged lock mounts in a convenient location behind the passenger peg bracket on the left side. The black anodized billet aluminum base for the lock is reversible, so you could also install it on the right side if you prefer. Includes 2 keys. Although designed for BMW S1000R ('14- ), it will also fit on S1000RR (all years).

BMW S1000R ('14- ) Helmet Lock



7/27/'15

New parts for Kawasaki H2 arriving soon!



Kawasaki H2 Engine Sliders
Rugged 'revolver'-style DELRIN slider pucks mounted with black anodized billet aluminum brackets, for excellent protection of the engine case and fairings if you slide.


Kawasaki H2 Front + Rear Axle Sliders
These DELRIN axle sliders are a great way to protect front and rear wheels, along with the parts around them, from scrape damage in a fall.

More new parts for Kawasaki H2


7/22/'15

Reverse Shift Rear Sets for Ninja 1000 + Z1000 ABS!

SATO RACING Reverse Shift Rear Sets for '11-'15 Kawasaki Ninja 1000 and Z1000 ABS provide a dedicated reverse (GP-style) shift pattern. 8 adjustable positions. In stock now in Black anodized finish!

Ninja 1000 / Z1000 ABS Reverse Shift Rear Sets



7/14/'15

New parts for '15- Yamaha YZF-R1 coming soon!

Yamaha YZF-R1 '15- Rear Sets (standard version)
These billet aluminum Rear Sets provide 5 adjustable peg positions, moving your feet up and back compared to stock for a sportier riding position. Compatible with stock brake light switch. Choice of Black or Gold anodized finish.


Yamaha YZF-R1 '15- Race Concept Rear Sets
These dedicated racing Rear Sets provide 5 adjustable positions, bringing your feet significantly up and back compared to stock. Not brake light compatible.


Yamaha YZF-R1 '15- Frame Sliders
Featuring tough, abrasion-resistant DELRIN slider pucks, for excellent protection of the fairings if you lay it down at speed on the track.


Yamaha YZF-R1 '15- Engine Sliders
DELRIN guards mounted with billet aluminum brackets, protecting the engine case and lower fairing if you slide.

More new parts for '15 R1


6/29/'15

Frame Sliders for KTM RC390!

SATO RACING Frame Sliders for '15- KTM RC390 are made with tough, abrasion-resistant DELRIN plastic for protection of the fairings and other exposed parts if you slide. Mounted with anodized billet aluminum brackets and collars. (L/R Set of 2).

KTM RC390 '15 Frame Sliders



6/18/'15

New parts for Honda Interceptor and CB1100 coming soon!

Honda VFR800F/ Interceptor '14- Frame Sliders
Tough DELRIN slider pucks mointed with anodized billet aluminum brackets, for excellent protection of the fairings in a slide. (Fairing mods required)


Honda CB1100 '14- Frame Sliders
Featuring abrasion-resistant DELRIN slider pucks mounted with black anodized billet aluminum mounting brackets, for protection of the exposed engine and exhaust parts if you lay it down at speed on the track.


Honda CB1100 '14- Front Axle Sliders
DELRIN slider pucks attached with a stainless steel throughbolt, for the most effective protection of the front wheel and fork.


Honda CB1100 '14- Rear Sets
These anodized billet aluminum Rear Sets bring your feet 40mm higher and 40mm further back compared to the stock CB1100 footpegs, for a more aggressive riding position. Choice of Black or Silver.

More new parts for Honda


4/23/'15

New for '14- Honda CBR650F!

Honda CBR650F Rear Sets
These billet aluminum Rear Sets feature 6 adjustable positions that move your feet higher up and back compared to stock. Choice of Black, or Gold w/ contrasting Black base plates and pedals.


Honda CBR650F Racing Hooks
When the passenger pegs have been removed, these stylish Racing Hooks give you sturdy anchor points for tie-down straps, with the added bonus of covering up those unsightly holes in the frame. Choice of Black or Gold anodized finish. (Set of 2)


Honda CBR650F Frame Sliders
Featuring tough, abrasion-resistant DELRIN slider pucks and billet aluminum mounting brackets, for excellent protection of the engine and fairings if you lay it down at speed on the track.


CBR650F/ VFR800F Interceptor Front Axle Sliders
Featuring DELRIN slider pucks attached with a stainless steel throughbolt, for protection of the front wheel and fork.


Timing Hole Plug
DELRIN guard mounted on a gold-anodized billet aluminum base, for protection of the lower engine case and lower fairing if you slide on the track. Perfect for CBFR650F and other Honda sportbike models that have exposed timing hole covers. In stock now!

More new parts for Honda


4/20/'15

Rear Sets for '15 BMW S1000RR coming soon!

SATO RACING's new Rear Sets for '15 BMW S1000RR provide 15 positions in a wide adjustment range. Easily switch from stock to reverse shift pattern too. Choice of all-Black, or Silver or Gold with contrasting black base plates and shift pedal.

BMW S1000RR '15 Rear Sets



4/15/'15

New parts for KTM RC125 and RC390 coming soon!


KTM RC125 / RC390 Rear Sets
These billet aluminum Rear Sets feature 8 adjustable positions. Available in 2 versions: Standard and Reverse Shift. Choose from all-Black anodized finish, or Gold over black base plates.


KTM RC125 Frame Sliders
Featuring tough, abrasion-resistant DELRIN slider pucks and billet aluminum mounting brackets. this model fits (non-U.S. model) RC125 / RC200.


KTM RC125 / RC390 / 390 Duke
Front Axle Sliders

Featuring DELRIN slider pucks attached with stainless steel bolts, for maximum protection of the front wheel and fork area if you slide on the track.


KTM RC125 / RC390 Racing Hooks
These sturdy Racing Hooks provide useful tie-down loops and hide the frame holes when passenger pegs have been removed. Choice of Black or Gold.


KTM RC125 / RC390 Helmet Lock
This rugged lock gives you a convenient way to stow your helmet. Attaches along the seat rail on the left side.
(ETA: late-July 2015)

More new parts for KTM


4/7/'15

New for BMW R nineT !

BMW R nineT Rear Sets
Black or Silver-anodized billet aluminum Rear Sets, featuring adjustable positions that move your feet rearward compared to stock for a sportier riding position.


BMW R nineT Front Axle Sliders
Featuring tough, abrasion-resistant DELRIN slider pucks for excellent protection of the front wheel and fork if you slide on the track.


BMW R nineT Helmet Lock
Securely stow your helmet on a R nineT with this durable new Helmet Lock. Mounts in a convenient location on the left side under the tail.


New BMW S1000R '14-'15 parts coming soon!

BMW S1000R Rear Sets
These anodized billet aluminum Rear Sets for S1000R feature a wide range of adjustable positions. Choice of Black, Silver or Gold.


BMW S1000R Engine Sliders
Left and right-side 'Revolver' style DELRIN slider pucks with anodized billet aluminum mounting brackets, for excellent protection of the engine case and fairings if you slide it.

More new parts for BMW


3/26/'15

Frame Sliders for '15 BMW S1000RR coming soon!

SATO RACING's new Frame Sliders for '15 BMW S1000RR feature tough 'Revolver'-style slider pucks made of DELRIN plastic designed for maximum protection in a slide. Mounted with anodized billet aluminum collars and chrome molybdenum bolts. (Set of 2). Arriving mid-April!

BMW S1000RR '15 Frame Sliders



3/23/'15

New for MV Agusta Brutale 675/800/Dragster!


Brutale 675/800/Dragster Rear Sets
These anodized billet aluminum Rear Sets are adjustable in a wide range of positions. Choice of all Black, or Silver or Gold with contrasting black base plates.


Brutale 675/800/Dragster Frame Sliders
Featuring tough, abrasion-resistant DELRIN slider pucks for excellent protection of the fairings and exposed engine parts if you slide on the track.


Brutale 675/800/Dragster Engine Sliders
Featuring DELRIN slider pucks attached to high strength billet aluminum mounting brackets for protection of the engine case in a slide. [L] and [R]-side Engine Sliders, sold separately. [R]-side in stock now.


Brutale 800 Dragster Racing Hooks
Anodized billet aluminum Racing Hooks provides sturdy tie down loops for strapping down your Dragster when passenger pegs have been removed. Choice of Black or Gold.

More new parts for Brutale 675/800/Dragster


3/12/'15

New parts for '15 Yamaha YZF-R3/ R25 coming soon!


YZF-R3/ R25 Rear Sets (standard version)
These anodized billet aluminum Rear Sets provide peg positions higher / further back compared to stock for a sportier riding position. Brake light compatible. Choice of Black or Gold.


YZF-R3/ R25 'Race Concept' Rear Sets
These specialized racing Rear Sets provide a wide range of adjustable positions that place your feet substantially higher / further back compared to stock. Choice of Black w/ Gold accents, or Gold over Black. (not for street use).


YZF-R3/ R25 Frame Sliders
Featuring tough, abrasion-resistant DELRIN slider pucks securely attached to the frame with high strength anodized billet aluminum mounting brackets. Available in 2 versions: low-mount (type1) and high-mount (type2).


YZF-R3 / R25 Front Axle Sliders
Front Axle Sliders featuring tough Delrin slider pucks fastened to the wheel hub with a stainless steel throughbolt.


YZF-R3 / R25 Racing Hook
Anodized billet aluminum Racing Hook. Provides a sturdy tie down loop for strapping down your R3 if the L-side passenger peg bracket has been removed. Choice of Black or Gold.


YZF-R3 / R25 Helmet Lock
Securely stow your helmet with this Helmet Lock designed for '15 R3. Installs in a convenient location below the seat on the left side. Includes 2 keys.

More new parts for Yamaha YZF-R3


2/20/'15

Sliders and more for '15 Suzuki GSX-S750!

We have confirmed our Rear Sets, Frame Sliders, Axle Sliders and Helmet Lock originally designed for the (non-U.S. market) Suzuki GSR750 will also fit the new (49-state) U.S. version, rebadged for '15 as GSX-S750. In stock now!

More parts for Suzuki GSX-S750



2/17/'15

Diavel '14- Frame Sliders and more!


Ducati Diavel '14-'15 Frame Sliders
Just arrived - Frame Sliders for '14-'15 Diavel. Featuring DELRIN slider pucks with anodized billet aluminum collars and a chrome moly throughbolt, to best protect if in a slide at speed on the track.


Z1000 '14- Front Axle Sliders
Now in stock - Front Axle Sliders for '14- Kawasaki Z1000! These Axle Sliders utilize low-profile DELRIN slider pucks secured to the wheel hub with a stainless steel throughbolt.


More 'Gunmetal' Handle Bar Ends in stock!
Our LONG-style billet aluminum Handle Bar Ends are now available in 'Gunmetal' anodized finish, in addition to Black, Silver and Gold. 'Gunmetal' is an iridescent dark gray with hints of green, blue and magenta that shifts color depending on lighting! In sizes to fit most sport bike models.


1/13/'15

NEW! S1000RR 'Race Concept'-edition stock shift Rear Sets!

We now offer a Stock Shift version of our new 'Race Concept' Rear Sets for BMW S1000RR, in addition to the Reverse Shift version already available! This 'Standard' version features an integrated shift pedal with a dedicated stock shift pattern, utilizing the stock shift rod pass-through in the frame.

Our new 'Race Concept' series of Rear Sets are pure, no-compromise race-spec Rear Sets, designed for track-only bikes. These specialized Rear Sets provide a range of positions that can move your feet significantly higher up compared to stock, better to help maximize lean angle during cornering. (not for street use).

BMW S1000RR 'Race Concept' Rear Sets



1/2/'15

Just arrived - new Lever Guards and more!


Lever Guards
Our new redesigned Lever Guards feature an adjustable pivot that lets you change the angle of the arm and overall length of the guard. Fits on either the brake or clutch side.
2 styles are available:
'Type 1' Lever Guard is designed for use with a compact (22mm) Handle Bar End (sold separately).
'Type 2' Lever Guard is designed for use with Sato Racing full-size (30mm) Handle Bar Ends.


22mm Handle Bar Ends
We now have compact 22mm Handle Bar Ends intended for use with our 'type1' Lever Guards, but on many models they can even be installed without the Lever Guard. Choice of anodized billet aluminum (Black, Silver, Gold or Gunmetal) or stainless steel. Sold individually.


'Gunmetal' Handle Bar Ends
Many models of our full-size (30mm) SHORT-style Handle Bar Ends are now offered in anodized 'Gunmetal', a color-shifting iridescent dark gray with hints of green, blue and magenta! Now available in sizes to fit Honda, Suzuki, Yamaha, Ducati, KTM and others.


Husqvarna Nuda 900 Frame Sliders
Now in stock - Frame Sliders for the rare (non-U.S.) Husqvarna Nuda 900/R! Featuring heavy-duty DELRIN slider pucks securely attached to the frame with black-anodized billet aluminum collars and chrome molybdenum bolts, for maximum protection on the track. (L/R set)


H-D XL883/1200 '14 Rear Sets
Rear Sets for 2014 Harley XL-series! fits non-ABS models with compatible aftermarket 2-into-1 exhaust systems. Tandem Brackets for the stock passenger pegs are an option for XL1200. Choice of Black or Silver.


Ducati Monster 1200/ 821 Frame Plugs
Stylish billet aluminum Frame Plugs held securely in place with urethane bushings. Choice of Black, Silver or Gold. (Black is now in stock). Set of 2.


HomeRear SetsFrame SlidersAxle SlidersSATO CarbonOther PartsAccessoriesReplacement PartsContactFacebookSite MapAbout
Search by Model: apriliaBimotaBMWBuellDucatiH-DHondaHusqvarnaKawasakiKTMMoto GuzziMV AgustaSuzukiTriumphYamaha