HANDLE BAR ENDS
- Size: M6 -
|
SATO RACING Handle Bar Ends - Size M6 fits various Aprilia, Honda, Suzuki, Triumph and Yamaha models with M6-threaded handle bar openings. Available in many sizes and styles. These Handle Bar Ends can be installed together with our Lever Guards (Details Below). (partial) compatibility list: APRILIA RSV1000 / Tuono/V4 (-'11) / Mana / Shiver HONDA GROM* / Monkey 125* SUZUKI GSX-R600/750 (all years) / GSX-R1000 ( -'16) / GSR400-750 / GSX-S750 ('15-'18) / Hayabusa ( -'20)/ SV-series ( -'15) / GSF-series TRIUMPH** Daytona675 / Street Triple 675/765 '13-'17 / Street Twin '16 YAMAHA YZF-R1 (all years)/ R6 '06-'20 / R7 '22 / MT-09 '21- / FZ8 / FZS600 ( -'03) / FJR1300 / VMAX 1700 NOTE: Certain bike models with M6-threaded handle bars, such as most Honda models, and Yamaha YZF-R3, have threaded holes set too far deep into the bars for our M6 bar ends to fit correctly. For those models, we recommend removing the stock threaded bar inserts and installing our Honda-type Bar Ends instead. * For Honda GROM / Monkey 125, you can use our M6 Bar Ends, but fitment requires adding 5mm Spacer Collars behind the Bar Ends. (Sold separately. Details below.) ** Fits earlier Triumph models with the stock M5/M6 threaded inserts intact. If these inserts have been removed, our M8 size Bar Ends may fit. If the internal handle bar internals are removed entirely, get our Ducati/KTM type Bar Ends for hollow bars instead. Triumph models can vary a lot in handle bar internal design, even among the same models manufactured at different times (For instance, these should fit a 2017 Street Triple 765 without the stock bar end mirrors, but not the 2018+ Street Triple 765, which requires the adapter collars included with our M6 Bar Ends for Triumph), so check your bars for compatibility before ordering. |
| SATO RACING M6 Handle Bar Ends are available in 5 unique styles - From left to right: Full-size (35mm diameter), standard size (30mm diameter), which comes in 3 lengths: LONG style, SHORT style, and FLAT(very Short) style, and Compact (22mm diameter) button-style Bar Ends. |
| You can choose from many styles and colors of Bar Ends, which are made of either billet Aluminum or Stainless Steel. Our aluminum Bar Ends are available in your choice of Black, Silver, Gold, Red, or NEW Green and Blue anodized finish. Our Stainless Steel Bar Ends (seen on the upper right) are heavier than the aluminum type and that extra weight can help to reduce handle bar vibrations. |
| SATO RACING Full size (35mm diameter) Handle Bar Ends double as sliders, utilizing end caps made of high-density, abrasion-resistant Delrin to help protect your bars and bar-mointed controls and accessories from scrapes or more serious damage if you lay it down. Choice of anodized billet aluminum (Black, Silver, Gold, Red, Green or Blue), or Stainless Steel. |
| At nearly 1 lb for the set, the Stainless Steel version of our Full-size Bar Ends are double the weight of the aluminum bar ends of the same size. That extra weight at the ends of the bars can help to suppress vibrations coming through the handle bars. |
LONG-style Bar Ends (30mm diameter)
LONG-style Bar Ends (30mm diameter)
SHORT-style Bar Ends (30mm diameter)
SHORT-style Bar Ends (30mm diameter)
|
Our Handle Bar Ends are CNC-machined out of either high
strength billet aluminum or stainless steel, and feature intricate details such as a knurled grip
pattern, along with laser-etched Sato Racing logo script around the outer edge. All of our 30mm-type Bar Ends (SHORT, LONG and FLAT styles) include black anodized aluminum spacers and stainless steel bolts. |
FLAT-style Bar Ends (30mm diameter)
FLAT-style Bar Ends (30mm diameter)
| Our FLAT style Bar Ends feature a low-profile design for a clean, flush look. - This style is available in 4 colors: Black, Silver, Gold or Red anodized finish. |
Compact (22mm diameter) Handle Bar Ends - These button-style Bar Ends
are around the same diameter as the bars. A racy alternative to our full-size Bar Ends.
FULL-size (35mm Diameter) size M6
HANDLE BAR ENDS (Set of 2)
| COLOR | PART# | PRICE | ||
 |
BLACK | BE35-M6-B | $58 |
 |
 |
SILVER | BE35-M6-S | $58 |
|
 |
GOLD | BE35-M6-G | $58 |
|
 |
RED | BE35-M6-RD | $58 |
|
 |
GREEN | BE35-M6-GR | $58 |
|
 |
BLUE | BE35-M6-BU | $58 |
|
 |
STAINLESS STEEL | BE35-M6-SUS | $70 |
|
 |
Replacement End Cap (Delrin) |
EC-BE35 | $8.00 |
|
Standard (30mm Diameter) Size M6
LONG style HANDLE BAR ENDS (Set of 2)
| COLOR | PART# | PRICE | ||
 |
BLACK | BE-M6L-B | $38 |
|
 |
SILVER | BE-M6L-S | $38 |
|
 |
GOLD | BE-M6L-G | $38 |
|
 |
RED | BE-M6L-RD | $38 |
|
 |
GREEN | BE-M6L-GR | $38 |
|
 |
BLUE | BE-M6L-BU | $38 |
|
 |
STAINLESS STEEL | BE-M6L-SUS | $48 |
|
Standard (30mm Diameter) Size M6
SHORT style HANDLE BAR ENDS (Set of 2)
| COLOR | PART# | PRICE | ||
 |
BLACK | BE-M6S-B | $35 |
|
 |
SILVER | BE-M6S-S | $35 |
|
 |
GOLD | BE-M6S-G | $35 |
|
 |
RED | BE-M6S-RD | $35 |
|
 |
GREEN | BE-M6S-GR | $35 |
|
 |
BLUE | BE-M6S-BU | $35 |
|
 |
STAINLESS STEEL | BE-M6S-SUS | $45 |
|
Standard (30mm Diameter) Size M6
FLAT style HANDLE BAR ENDS (Set of 2)
| COLOR | PART# | PRICE | ||
 |
BLACK | BE-M6F-B | $33 |
|
 |
SILVER | BE-M6F-S | $33 |
|
 |
GOLD | BE-M6F-G | $33 |
|
 |
RED | BE-M6F-RD | $33 |
|
Compact (22mm Diameter) HANDLE BAR ENDS (Set of 2)
| COLOR | PART# | PRICE | ||
 |
BLACK | BE22-M6-B | $30 |
|
 |
SILVER | BE22-M6-S | $30 |
|
 |
GOLD | BE22-M6-G | $30 |
|
 |
RED | BE22-M6-RD | $30 |
|
 |
GREEN | BE22-M6-GR | $30 |
|
 |
BLUE | BE22-M6-BU | $30 |
|
 |
STAINLESS STEEL | BE22-M6-SUS | $40 |
|
* Click Here for important info about Sato color-anodized parts.
BAR END SPACERS (option)
| In some cases, the 2mm spacer collars included with our standard M6 Bar Ends might not be quite thick enough to provide clearance between the ends of the bars/grips and the back sides of the Bar Ends, such as if the threaded hole is recessed inside the bar opening. For this purpose, we have thicker 5mm spacer collars that can replace those standard 2mm spacers, or you can even stack them together with the 2mm spacers for an even thicker standoff if needed. Black anodized billet aluminum. 5mm Spacers are recommended if installing our M6-size Handle Bar Ends on a Honda GROM or Monkey 125. Replacement 2mm Spacers, like the ones included with our M6 Handle Bar Ends, are also available to purchase separately. |
Spacer Collar is sold individually. For a L/R set, purchase Qty:2
| BAR END SPACER COLLAR Size: M6 x 5mm |
BECLR-5-6 $8 |
|
| BAR END SPACER COLLAR Size: M6 x 2mm |
BECLR-2-6 $5 |
|
LEVER GUARD
Size: M6
| SATO RACING Lever Guards help protect your hands and prevent unintentional engagement of the clutch or brake levers, such as during contact with another rider on the track. Made of lightweight Black-anodized billet aluminum, these Lever Guards have an adjustable pivot that lets you change the angle of the arm and overall length of the guard. This pivot also allows you to rotate the arm of the Lever Guard, which means it can be installed on either the Right (brake) side or left (Clutch) side. 2 versions of our Lever Guard are available: Type 1 Lever Guard is designed to be installed with our compact (22mm) Bar Ends, while the Type 2 Lever Guard has a wider base that is sized for use with our standard size (30mm) Bar Ends. |
|
'Type 1' Lever Guard (left) shown with our compact, button-style 22mm Handle Bar Ends. 'Type 2' Lever Guard (right) shown with our standard 30mm Bar Ends (SHORT-style). Type 2 Lever Guard is also compatible with our FLAT-style and LONG-style Bar Ends. |
SATO RACING standard-size (30mm diameter) SHORT-style Bar Ends
(part# BE-M6S-G) and 'type2' Lever Guard on a 2016 Suzuki GSX-S1000.
SATO RACING standard-size (30mm diameter) SHORT-style Bar Ends
(part# BE-M6S-G) and 'type2' Lever Guard on a 2015 Yamaha R1.
Type 2 Lever Guard part# LG30-M6 is designed for use with SATO RACING standard-size
(30mm) Handle Bar Ends
part# BE-M6F /BE-M6S / BE-M6L
SATO RACING 'Type1' Lever Guard (part# LG22-M6) and 22mm Bar End (part# BE22-M6-G)
Type 1 Lever Guard (part# LG22-M6) is compatible with our 22mm Handle Bar Ends.
| LEVER GUARD [type 1] Size: M6 |
LG22-M6 $75 |
|
| LEVER GUARD [type 2] Size: M6 |
LG30-M6 $78 |
|
Have questions or prefer to order by phone? You can call us to place an order - 
More Sato Racing items
|